90-200841/0-37052 Slewing Ring Bearing 28.898x37.323x2.205 Inch
| da: |
138.113 mm |
| Da: |
289.999 mm |
| Ca: |
89.789 mm |
| A1: |
158.75 mm |
| A2: |
288.925 mm |
| S: |
4.763 mm |
| ba: |
70.644 mm |
| H: |
338.137 mm |
| PDF |
|
Product Details
| da |
138.113 mm |
| Da |
289.999 mm |
| Ca |
89.789 mm |
| A1 |
158.75 mm |
| A2 |
288.925 mm |
| S |
4.763 mm |
| ba |
70.644 mm |
| H |
338.137 mm |
| H1 |
169.875 mm |
| H2 |
66.675 mm |
| L |
558.8 mm |
| R1 |
104.775 mm |
| R2 |
33.337 mm |
| RG |
3/4 NPT |
| PG |
1/4 NPT |
| h |
51.594 mm |
| Housing |
SSAFS 532 |
| Stabilizing ring |
SR-32-0 |
| Taconite seal |
TER 130 |
| End plug (suffix Y) |
EPR 16 |
| Max. speed for Taconite seal |
560 r/min |
| P60° |
345 kN |
| P90° |
207 kN |
| P120° |
133 kN |
| P150° |
120 kN |
| P180° |
145 kN |
| Pa |
38.5 kN |
| Mass pillow block |
132 kg |
| Cap bolt |
7/8-9 UNC |
| Cap bolt recommended tightening torque |
813.5 N·m |
| Cap bolt, SAE grade |
8 |
| Eye bolt |
2 x 3/8-16 UNC |
| Initial grease fill |
793.8 g |