| C - Cup Width | 14.288 mm |
| B | 18.011 mm |
| Aa - Cage-Cone Backface Clearance | 1 mm |
| G2 - Heat Generation Factor (Rib-Roller End) | 16 |
| Da - Cup Frontface Backing Diameter | 73.90 mm |
| r - Cup Backface To Clear Radius2 | 1.52 mm |
| Cone Part Number | 11163 |
| Db - Cup Backface Backing Diameter | 69.09 mm |
| Y - ISO Factor9 | 1.23 |
| db - Cone Backface Backing Diameter | 46.99 mm |
| e - ISO Factor8 | 0.49 |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 2800 lbf |
| a - Effective Center Location3 | -0.8 mm |
| da - Cone Frontface Backing Diameter | 46.48 mm |
| d | 41.275 mm |
| B - Cone Width | 17.384 mm |
| K - Factor7 | 1.2 |
| D | 80 mm |
| R - Cone Backface To Clear Radius1 | 0.760 mm |
| C0 - Static Radial Rating | 12400 lbf |
THK Bearings Knowledge Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | R | a | r | D | C | B | T |
| EE277455/277565 | NSK | 1155,7 mm | 6,4 mm | 207,3 mm | 6,4 mm | 1435,1 mm | 4150 kN | 120,65 mm | 120,65 mm |
| EC12775H106 | SNR | 103 mm | - | - | - | 133 mm | - | - | - |
| E-EE277455/277565 | NTN | 1155,7 mm | - | - | - | 1435,1 mm | 95,25 mm | 120,65 mm | 120,65 mm |
| EE277455-40000/277565-40000 | TIMKEN | 45.5 Inch | 1,155.7 Millimeter | - | - | - | 56.5 Inch | 1,435.1 Millimeter | - | - | - |
| BS227759D | LINK BELT | - | - | - | - | - | - | - | - |
| BS227752 | LINK BELT | - | - | - | - | - | - | - | - |
| 2775-2 | TIMKEN | 1.377 Inch | 34.976 Millimeter | - | - | - | 0 Inch | 0 Millimeter | - | 1.01 Inch | 25.654 Millimeter | - |
| SK-2775 | SEALMASTER | - | - | - | - | - | - | - | - |
| 29602-2775 | Garlock | - | - | - | - | 3.5820 in | - | - | - |
| SR55-2820L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Cg - Geometry Factor:0.0897; C - Cup Width:18.000 mm; K - Factor2:1.44; Db - Cup Backface Backing Diameter:90.93 mm; Series:30211M; Da - Cup Frontface Backing Diameter:95.5 mm; G1 - Heat Generation Factor (Roller-Raceway):41.9; G2 - Heat Generation Factor (Rib-Roller End):22.8; r - Cup Backface To C |
| SR55-2580L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | r - Cup Backface To Clear Radius1:1.52 mm; K - Factor2:1.38; G1 - Heat Generation Factor (Roller-Raceway):104; Da - Cup Frontface Backing Diameter:119.90 mm; Design Units:METRIC; Y - ISO Factor4:1.42; C - Cup Width:22.000 mm; D:125 mm; Cg - Geometry Factor:0.123; e - ISO Factor3:0.42; Cup Part Numbe |
| SR55-1740L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Ca90 - Dynamic Thrust Rating (90 million revolutions)7:37200 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:91000 lbf; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)6:201000 lbf; db - Cone Backface Backing Diameter:13.15 in; G1 - Heat Generation Fac |
| SR55-2100L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Ab - Cage-Cone Frontface Clearance:0.17 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:64300 lbf; r - Cup Backface To Clear Radius2:0.130 in; C - Cup Width:2.1250 in; Y2 - ISO Factor10:3.03; Cg - Geometry Factor12:0.165; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3650 |
| SR55-2700L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Cg - Geometry Factor:0.126; db - Cone Backface Backing Diameter:108 mm; C0 - Static Radial Rating:172000 N; C90 - Dynamic Radial Rating (90 million revolutions)5:32500 N; Ab - Cage-Cone Frontface Clearance:3.8 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:49100 lbf; WPD:138.7 mm; |
| SR55-2460L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Design Units:METRIC; da - Inner Ring Backing Diameter:24.800 mm; D:42 mm; Bearing Weight:0.064 Kg; d:20 mm; Cage Type:CR - Phenolic Outer; Limiting Speed (Oil):97800 rpm; Precision Class:ISO P4S (ABEC 7/9); C0 - Static Radial Rating:3740 N; R - Inner Ring To Clear Radius2:0.6 mm; Limiting Speed (Gre |
| SR55-1380L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Limiting Speed (Oil):13440 rpm; Design Units:METRIC; C0 - Static Radial Rating:149610 N; Contact Angle:15 º; Bearing Width:35 mm; Precision Class:ISO P4S (ABEC 7/9); da - Inner Ring Backing Diameter:165.200 mm; Cage Type:CR - Phenolic Outer; do - Ball Diameter:22.225 mm; Da - Outer Ring Backing Diam |
| SR55-2940L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Dimension G:2.990 in; Housing Style:Two-Bolt Pillow Bloc; Eng Internal Radial Clearance - Min:0.0037; Dimension B:7.20 in; C0 - Static Load:62500 lb; Oil Lubrication - T Seal:2650 rpm; Dimension D Max:10.98 in; Bearing Number:22216; Dimension SVV:4.17 in; Weight:46.0 lb; Grease Lubrication - B/C/O S |
| SR55-3000L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | T:38 mm; Weight:310.00 Kg; Suitable Lockplate No.:MS 31/950; Dp:1017 mm; D4:1080 mm; Bn:125 mm; Thread D11:Tr950x8; s:70 mm; D3:1170 mm; Tapped Hole Threads:M24; |
| SR55-1260L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Ro:G1/4; t:15 mm; L1:325.00 mm; Appropriate Hydraulic Nut:HMV180; e:15.0 mm; b:53 mm; Weight:226.00 Kg; Thread D12:Tr900x7; Appropriate Withdrawal Nut No.:HM30/900; d1:800.00 mm; L1:343 mm; |
| SR55-2340L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | Series:JF4500; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:22500 N; Ab - Cage-Cone Frontface Clearance:2.54 mm; B - Cone Width:35.000 mm; Da - Cup Frontface Backing Diameter:89.90 mm; G1 - Heat Generation Factor (Roller-Raceway):47.9; G2 - Heat Generation Factor (Rib-Roller End):13.5; Cg |
| SR55-2220L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) | db - Cone Backface Backing Diameter:2.99 in; r - Cup Frontface To Clear Radius2:0.03 in; B - Cone Width:0.8660 in; C - Double Cup Width:1.8125 in; R - Cone Backface To Clear Radius1:0.16 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:38700 lbf; Cage Type:Stamped Steel; Bearing Weig |
SR45-2775L RAIL THK Linear Bearing,Linear Motion Guides,Radial Type LM Guide (SR),Radial Rail (SR) Video
THK SR45-2775L RAIL Distributor | 养贞轴承 - bob竞技体育
SR45-2775L RAIL ; Rail type, Caged Ball Rail ; Maximum length, 2775 mm ; Nominal rail size, 45 mm ; Measurement standard, 公制 ; 硬度, 58 to 64 HRC.
LM Guide - THK Technical Support
Flatness of the LM Rail and the LM Block Mounting Surface .. 團1-151 ... SR 15 SR 20 SR 25 SR 30 SR 35 SR 45 SR 55 SR 70 SR 85 SR 100 SR 120 SR 150. LM rail.666 pagesMissing: 2775L | Must include: 2775L
SR45-2775L RAIL THK Linear Motion Guide - 养贞轴承
SR45-2775L RAIL THK Linear Motion Guide ; Nominal rail size, 45 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, SR45 ; Standard pitch F · 80.
Radial Rail (SR) - Hisaka
Radial Rail (SR) is one of the outstanding products in THK Radial Type LM Guide (SR). Some popular models: SR 45. SR45-570L RAIL; SR45-675L RAIL; SR45-780L ...
THK Radial Rail (SR) - THK Radial Type LM Guide (SR)
Radial Rail (SR) is one of the outstanding products in THK Radial Type LM Guide (SR). Some popular models: SR 45. SR45-570L RAIL; SR45-675L RAIL; SR45-780L ...
SR45-2775L RAIL THK 径向导轨(SR) | 上海佰仕彼得轴承制造有限公司
产品型号, SR45-2775L RAIL. Rail type, Caged Ball Rail. Maximum length, 2775 mm. Nominal rail size, 45 mm. Measurement standard, 公制. 硬度, 58 to 64 HRC.
THK SR45 Series Linear Guide System | Technico
Rail lengths in this series range from 160mm in the SR15 size, up to 2520mm in the SR55 size. Blocks are also available in all sizes, from SR15 through SR55.
SR45-2775L RAIL THK Linear Motion Guide | Lily Bearing
SR45-2775L RAIL THK Linear Motion Guide ; Nominal rail size, 45 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC ; Series, SR45 ; Standard pitch F · 80.Rail type: Caged Ball RailHardness: 58 to 64 HRCMaximum length: 2775 mm
THK SHS45-2775L, CAGED BALL RAIL, MAXIMUM LENGTH
THK SHS45-2775L, CAGED BALL RAIL, MAXIMUM LENGTH: 2775MM. MAXIMUM LENGTH: 2775MM. MANUFACTURED BY: THK. THK SHS45-2775L. CAGED BALL RAIL.