021.25.630 UWE Slewing Bearing/slewing Ring
| da: | 84.138 mm |
| Da: | 180 mm |
| Ca: | 55.804 mm |
| A1: | 111.125 mm |
| A2: | 152.797 mm |
| ba: | 38.894 mm |
| H: | 217.488 mm |
| H1: | 114.3 mm |
| PDF |
|
Product Details
| da | 84.138 mm |
| Da | 180 mm |
| Ca | 55.804 mm |
| A1 | 111.125 mm |
| A2 | 152.797 mm |
| ba | 38.894 mm |
| H | 217.488 mm |
| H1 | 114.3 mm |
| H2 | 44.45 mm |
| J min. | 295.275 mm |
| J max. | 333.375 mm |
| L | 387.35 mm |
| N1 | 25.4 mm |
| R1 | 58.737 mm |
| R2 | 30.163 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 42.069 mm |
| Housing | SAF 520 |
| Stabilizing ring | 2 x SR-1520 |
| Labyrinth ring | 2 x LOR 100 |
| PosiTrac Plus contact element | 2 x B10724-102 |
| End plug (suffix Y) | EPR 12 |
| Max. speed for PosiTrac Plus seal | 1650 r/min |
| P60° | 136 kN |
| P90° | 81.4 kN |
| P120° | 50.7 kN |
| P150° | 46.3 kN |
| P180° | 55.6 kN |
| Pa | 10.2 kN |
| Mass pillow block | 28.1 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 203.4 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.875 in |
| Initial grease fill | 365.71 g |
