131.40.1250 UWE Slewing Bearing/slewing Ring
| da: | 71.438 mm |
| Da: | 180 mm |
| Ca: | 69.799 mm |
| A1: | 111.125 mm |
| A2: | 231.775 mm |
| S: | 4.763 mm |
| ba: | 48.419 mm |
| H: | 222.25 mm |
| PDF |
|
Product Details
| da | 71.438 mm |
| Da | 180 mm |
| Ca | 69.799 mm |
| A1 | 111.125 mm |
| A2 | 231.775 mm |
| S | 4.763 mm |
| ba | 48.419 mm |
| H | 222.25 mm |
| H1 | 114.3 mm |
| H2 | 44.45 mm |
| J min. | 295.275 mm |
| J max. | 333.375 mm |
| J1 | 60.325 mm |
| L | 387.35 mm |
| N1 | 22.225 mm |
| R1 | 65.088 mm |
| R2 | 30.163 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 44.45 mm |
| Housing | FSAF 617 |
| Stabilizing ring | SR-20-17 |
| Taconite seal | TER 182 |
| End plug (suffix Y) | EPR 10 |
| Max. speed for Taconite seal | 1050 r/min |
| P60° | 104 kN |
| P90° | 62.3 kN |
| P120° | 39.1 kN |
| P150° | 35.6 kN |
| P180° | 42.7 kN |
| Pa | 15.3 kN |
| Mass pillow block | 34 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 515.2 N·m |
| Cap bolt, SAE grade | 8 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 181.44 g |
