AST 6017 AST Bearing
With over 10170 full-service stores, our AST 6017 AST Bearing inventory 48 mm A is extensive and our parts are priced UBC Mechanical Electronic Instrument Co., Ltd. 15 mm E right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | AST |
| Model Number: | 6017 |
| Bearing number: | 7020 CE/HCP4AH1 |
| Size (mm): | 150x100x24 |
| Bore Diameter (mm): | 150 |
| Outer Diameter (mm): | 100 |
| Width (mm): | 24 |
| d: | 100 mm |
| D: | 150 mm |
| B: | 24 mm |
| PDF |
6017 |
Product Details
| Bearing number | 7020 CE/HCP4AH1 |
| Size (mm) | 150x100x24 |
| Bore Diameter (mm) | 150 |
| Outer Diameter (mm) | 100 |
| Width (mm) | 24 |
| d | 100 mm |
| D | 150 mm |
| B | 24 mm |
| d1 | 117.38 mm |
| d2 | 114.2 mm |
| D1 | 132.61 mm |
| K | 0.5 mm |
| C1 | 7.82 mm |
| r1,2 - min. | 1.5 mm |
| r3,4 - min. | 1 mm |
| a | 28.9 mm |
| da - min. | 107 mm |
| db - min. | 107 mm |
| Da - max. | 143 mm |
| Db - max. | 144.4 mm |
| ra - max. | 1.5 mm |
| rb - max. | 1 mm |
| dn | 120.4 mm |
| Basic dynamic load rating - C | 44.9 kN |
| Basic static load rating - C0 | 40 kN |
| Fatigue load limit - Pu | 1.5 kN |
| Limiting speed for grease lubrication | 14500 r/min |
| Limiting speed for oil lubrication | 22000 mm/min |
| Ball - Dw | 12.7 mm |
| Ball - z | 27 |
| Gref | 17 cm3 |
| Calculation factor - f0 | 9.5 |
| Preload class A - GA | 240 N |
| Preload class B - GB | 720 N |
| Preload class C - GC | 1440 N |
| Calculation factor - f | 1 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.05 |
| Calculation factor - fHC | 1.01 |
| Preload class A | 97 N/micron |
| Preload class B | 154 N/micron |
| Preload class C | 212 N/micron |
| r1,2 min. | 1.5 mm |
| r3,4 min. | 1 mm |
| da min. | 107 mm |
| db min. | 107 mm |
| Da max. | 143 mm |
| Db max. | 144.4 mm |
| ra max. | 1.5 mm |
| rb max. | 1 mm |
| Basic dynamic load rating C | 44.9 kN |
| Basic static load rating C0 | 40 kN |
| Fatigue load limit Pu | 1.5 kN |
| Attainable speed for grease lubrication | 14500 r/min |
| Attainable speed for oil-air lubrication | 22000 r/min |
| Ball diameter Dw | 12.7 mm |
| Number of balls z | 27 |
| Reference grease quantity Gref | 17 cm³ |
| Preload class A GA | 240 N |
| Static axial stiffness, preload class A | 97 N/µm |
| Preload class B GB | 720 N |
| Static axial stiffness, preload class B | 154 N/µm |
| Preload class C GC | 1440 N |
| Static axial stiffness, preload class C | 212 N/µm |
| Calculation factor f | 1.12 |
| Calculation factor f1 | 1 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.05 |
| Calculation factor fHC | 1.01 |
| Calculation factor f0 | 9.5 |
| Mass bearing | 1.12 kg |
